PRODUCT

Injection Molding M/C for Rubber

페이지 비쥬얼
Feature
  • Beginners can operate this machine easily being arranged operating switch in order of working Process.
  • With using the speed cooling unit, the balanced rubber after finishing working is maintained in uncured condition.
  • This machine is operated in non-electrical load condition caused by fixed THK-bearing on the mold forth and back slide.
  • This machine has no transformation by casted body over FCD-45.
  • Connection between nozzle and locating is good and rubber do not let leak-out because of supplementary pressure time after injection.
  • Temperature control of temperature keeping oil is available to set up in a roon temperature to 120℃ and show exact value point ±2℃.
  • Worker’s tiredness is minimized because the height of machine is low for working.
  • The machine’s specification will be determinined by mold size and heating plate can be changeable.
  • The customer can choose the machine type between direct pressure type and clamping block type.
  • The customer can choose ejector gadget between front side of m/c or center area of mold.
Specifications
specifications / model SJIM
50		 SJIM
100		 SJIM
150		 SJIM
200
Clamping Force ton 50
 100 150 200
Clamping Type type HY'D-RAM
Injection Volume ST'D cc 300 500 1000 1000
Option cc 500 800 1500 1500
Injection Pressure kgf/㎠ 1800~2000
Screw Diameter Ø 25 40 40 40
Screw R.P.M rpm 0~120
Heating Plate mm 350×350 450×450 500×500 550×550
Day-Light mm 400 400 500 500
Clamping Stroke mm 300 300 400 400
Min Mold Thickness mm 100 100 100 100
Heater Capacity kw 4.8 8.4 13.2 20
Motor Capacity kw 7.5 11 11 15
Total Electric Capacity kw 18 25 27 38
Overall Dimension m 1.3×1.8×2.6 1.5×2.0×3.0 1.6×2.1×3.1 1.7×2.2×3.2
Machine Weight ton 3 5 6.5 7

specifications / model SJIM
250		 SJIM
300		 SJIM
350		 SJIM
400
Clamping Force ton 250
 300 350 400
Clamping Type type HY'D-RAM
Injection Volume ST'D cc 1000 2000 2000 3000
Option cc 1500 3000 3000 4000
Injection Pressure kgf/㎠ 1800~2000
Screw Diameter Ø 40 50 50 50
Screw R.P.M rpm 0~120
Heating Plate mm 600×600 650×650 700×700 750×750
Day-Light mm 500 750 750 800
Clamping Stroke mm 400 550 550 600
Min Mold Thickness mm 100 200 200 200
Heater Capacity kw 20 22 24 30
27.2
Motor Capacity kw 15 18.5 18.5 22.5
Total Electric Capacity kw 38 48 53 58
Overall Dimension m 1.7×2.2×3.2 2.0×2.5×4.0 2.2×2.5×4.2 2.5×2.7×4.5
Machine Weight ton 8 10 12 16

specifications / model SJIM
450		 SJIM
550		 SJIM
650		 SJIM
800
Clamping Force ton 450
 550 650 800
Clamping Type type HY'D-RAM
Injection Volume ST'D cc 4000 4000 5000 10000
Option cc 7000 7000 7000 14000
Injection Pressure kgf/㎠ 1800~2000
Screw Diameter Ø 60 60 60 70
Screw R.P.M rpm 0~120
Heating Plate mm 800×800 850×850 1000×950 1200×1100
Day-Light mm 800 900 900 1000
Clamping Stroke mm 600 600 600 650
Min Mold Thickness mm 200 300 300 350
Heater Capacity kw 32 35 42 47
Motor Capacity kw 22.5 30 30 37.5
Total Electric Capacity kw 62 70 80 92
Overall Dimension m 2.7×3.0×4.7 3.0×3.2×5.0 3.2×3.5×5.5 3.8×4.0×6.2
Machine Weight ton 18 20 35 50

specifications / model SJIM
1000		 SJIM
1200		 SJIM
1500		 SJIM
2000
Clamping Force ton 1000
 1200 1500 2000
Clamping Type type HY'D-RAM
Injection Volume ST'D cc 14000 25000 25000 40000
Option cc 20000 25000 30000 50000
Injection Pressure kgf/㎠ 1800~2000
Screw Diameter Ø 70 70 80 80
Screw R.P.M rpm 0~120
Heating Plate mm 1300×1200 1500×1300 1700×1500 2100×1800
Day-Light mm 1200 1200 1300 1500
Clamping Stroke mm 800 800 900 1000
Min Mold Thickness mm 400 400 400 500
Heater Capacity kw 50 56 62 74
Motor Capacity kw 45 45 52.5 75
Total Electric Capacity kw 110 120 130 160
Overall Dimension m 4.2×4.5×6.7 4.5×5.0×7.0 5.0×5.0×7.4 6.0×6.0×9.2
Machine Weight ton 60 70 80 110